Pairing a Columbus P-10 Pro

[KOwens]

Hi, I'm having trouble pairing a Columbus P-10 Pro submeter GNSS receiver to the GPS Connector App.
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0211::DevImplLibUSB.cpp] [openDeviceFD()] USB device read mode: fd=199
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0449::DevImplLibUSB.cpp] [readDeviceMode()] Found USB Device: Bus=1:2 VP=0x0484:0x5740
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0492::DevImplLibUSB.cpp] [addBulkCfgModes()] CDC-Ifc found: 0x484:0x5740 bus=1 dev=2 ifcInx=0 ifcNr=255 pktIO=64:64 epIn=0xFF epOut=0xFF CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0484::DevImplLibUSB.cpp] [addBulkCfgModes()] 0x484:0x5740 bus=1 dev=2 ifcInx=0 ifcNr=1 pktIO=64:64 epIn=0x81 epOut=0x1 CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0484::DevImplLibUSB.cpp] [addBulkCfgModes()] 0x484:0x5740 bus=1 dev=2 ifcInx=1 ifcNr=2 pktIO=64:64 epIn=0x82 epOut=0x2 CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0560::DevImplLibUSB.cpp] [logDescription()] USB device-description
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0562::DevImplLibUSB.cpp] [logDescription()] Manufacturer: carlos
[31.10.2024 13:02:12.691] [D] [TID:515964327168] [0565::DevImplLibUSB.cpp] [logDescription()] Product: COLUMBUS P-10 Pro GNSS Receiver Mode
[31.10.2024 13:02:12.692] [D] [TID:515964327168] [0568::DevImplLibUSB.cpp] [logDescription()] Serial-Number: 024737333133
[31.10.2024 13:02:12.692] [D] [TID:515964327168] [1080::DevImplLibUSB.cpp] [breakRead()] Bulk-Transfer stopped
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0312::DevImplLibUSB.cpp] [claimInterface()] ifcNr 1: in=0x81 cmd=0x1 rtk=0xFF pkg=64
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0338::DevImplLibUSB.cpp] [claimInterfaceAndInit()] Interface inx=0 nr=1 claimed
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0679::DevImplLibUSB.cpp] [setInitialCDC()] CDC-interface claimed: 0
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0691::DevImplLibUSB.cpp] [setMode()] set mode for vendor 0x484 - interface 1
[31.10.2024 13:02:12.694] [D] [TID:515964327168] [0698::DevImplLibUSB.cpp] [setMode()] Unhandled vendor: 0x484



I have the USB set to Generic.
Can I get help with this?

[Mazuch]

Hi,

looks like your Columbus device is using the USB vendor 0x0484 Specialix. (never heard of this vendor)
I'm working on an app-update which will handle USB-CDC interfaces in a better way.
So the only way is waiting for the next update because "Specialix" is not directly supported by my app.

Regards,
Markus

[KOwens]

Thank you for letting me know!
Just to confirm, this device should work after the update you're working on?