GPS Connector

Hi, I'm having trouble pairing a Columbus P-10 Pro submeter GNSS receiver to the GPS Connector App.
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0211::DevImplLibUSB.cpp] [openDeviceFD()] USB device read mode: fd=199
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0449::DevImplLibUSB.cpp] [readDeviceMode()] Found USB Device: Bus=1:2 VP=0x0484:0x5740
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0492::DevImplLibUSB.cpp] [addBulkCfgModes()] CDC-Ifc found: 0x484:0x5740 bus=1 dev=2 ifcInx=0 ifcNr=255 pktIO=64:64 epIn=0xFF epOut=0xFF CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.689] [D] [TID:515964327168] [0484::DevImplLibUSB.cpp] [addBulkCfgModes()] 0x484:0x5740 bus=1 dev=2 ifcInx=0 ifcNr=1 pktIO=64:64 epIn=0x81 epOut=0x1 CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0484::DevImplLibUSB.cpp] [addBulkCfgModes()] 0x484:0x5740 bus=1 dev=2 ifcInx=1 ifcNr=2 pktIO=64:64 epIn=0x82 epOut=0x2 CDC-IfcNr=0, BCD-Release=0x200
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0560::DevImplLibUSB.cpp] [logDescription()] USB device-description
[31.10.2024 13:02:12.690] [D] [TID:515964327168] [0562::DevImplLibUSB.cpp] [logDescription()] Manufacturer: carlos
[31.10.2024 13:02:12.691] [D] [TID:515964327168] [0565::DevImplLibUSB.cpp] [logDescription()] Product: COLUMBUS P-10 Pro GNSS Receiver Mode
[31.10.2024 13:02:12.692] [D] [TID:515964327168] [0568::DevImplLibUSB.cpp] [logDescription()] Serial-Number: 024737333133
[31.10.2024 13:02:12.692] [D] [TID:515964327168] [1080::DevImplLibUSB.cpp] [breakRead()] Bulk-Transfer stopped
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0312::DevImplLibUSB.cpp] [claimInterface()] ifcNr 1: in=0x81 cmd=0x1 rtk=0xFF pkg=64
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0338::DevImplLibUSB.cpp] [claimInterfaceAndInit()] Interface inx=0 nr=1 claimed
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0679::DevImplLibUSB.cpp] [setInitialCDC()] CDC-interface claimed: 0
[31.10.2024 13:02:12.693] [D] [TID:515964327168] [0691::DevImplLibUSB.cpp] [setMode()] set mode for vendor 0x484 - interface 1
[31.10.2024 13:02:12.694] [D] [TID:515964327168] [0698::DevImplLibUSB.cpp] [setMode()] Unhandled vendor: 0x484



I have the USB set to Generic.
Can I get help with this?

Hi,

looks like your Columbus device is using the USB vendor 0x0484 Specialix. (never heard of this vendor)
I'm working on an app-update which will handle USB-CDC interfaces in a better way.
So the only way is waiting for the next update because "Specialix" is not directly supported by my app.

Regards,
Markus

Thank you for letting me know!
Just to confirm, this device should work after the update you're working on?